a-1.jpg (10779 個位元組)
a-2.jpg (5185 個位元組) a-0.jpg (6441 個位元組)
a-4.jpg (13192 個位元組)
64057雲林縣斗六市科加二路3號
No. 3, Kejia 2nd Rd., Douliu, Yunlin County, Taiwan 64057
Tel: 886-5-5519-922       Fax: 886-5-5510-033

E-mail:sanes@ms32.hinet.net      http://www.sanes-press.com
 
H-type Power Presses A standard model for general use.
hb021.gif (326 個位元組)The H type is the key to cost to cost saving!

hb021.gif (326 個位元組)Deformation is the main cause of shortening die
  life. The H type frame press eliminates
  deformation, and will reduce die maintenance costs
  about 50%. H type provides stable precision even
  in presswork, leading to high press perform.
  Product inspection costs will be much saved.

 
 
Dimensions

Model SHP-80 SHP-110 SHP-160 SHP-200 SHP-250 SHP-300
Capacity ton 80 110 160 200 250 300
Tonnage rating point (above B.D.C.) mm 6 7 8 8 8 8
Stroke length mm 110 125 150 160 160 180
Stroke per minute S.P.M 35-90 35-80 30-75 30-70 30-60 40-60
Die height, slide to bolster mm 330 350 380 400 450 500
Slide adjustment mm 60 60 60 80 80 80
Slide area (a1×b1)   mm 600×500 650×550 700×600 750×600 800×650 850×700
Bolster area (a2×b2) mm 800×700 850×750 900×750 950×750 1000×800 1050×850
Floor to bolster
(not included isolation mounts)
mm 760 840 850 900 1000 1100
Press overall height (h2) mm 2740 3050 3210 3600 4100 4350
Main motor HP 10 15 20 25 30 40
Air pressure required    Kg/c 5 5 5 5 5 5