Rigidity Frame ensures Products Precision
|Load Transmission Section uses
high rigidity frame can minimized frame deflection, not
only in greatly increased high precised production, but
also prolonged die service life.
Heavy Duty Knuckle
|SK1 Series completed with a
heavy-duty knuckle motion, provide a slow touch speed in
the work range ensure a smooth flexible flow resulting
in stable, high precision presswork.
Overload Protector (H.O.L.P.)Protects Any Unusual
|When any unusual die overload
happens, high responsive H.O.L.P. system will
instantaneously activate. Then the drive transmission is
disconnected and the slide will stop immediately. Only
simply returning the slide to top dead center position
(TDC), resetting operation will be achieved
Based on high
precision manufacturing technology and super quality
main gear, the mechanisms of knuckle, the adjust screws,
and the joints of slide, overall clearance is 1/3 than
|High precision torque
transmission parts and min. break-through can prolong
die life and achieved better precision of completed
Steady Wet Type
Clutch and Brake System Completed Safety Operation
|Completed enclosed wet type
clutch and brake units can be isolated not only prevent
any dust but also can reduce noise from operation.
Based on special design of fricational surface, then no
any adjustment to be needed.
Can do great improvement for single operation
(intermittent) and can provide constant stopping
operation over long operation period.
Special Design Long
Slide Guides can Keep High Precision Manufacturing over
Long Operation Period
|Special design six-sided square
long slide guides can completed high endurance during
eccentric loading condition. This also can improve die
precision and prolong die life.
Use re-circulating lubrication system, can prevent
generation of heat from friction.
Based on Floor Mount Design
|Completed stored in
lower part of the bolster bed knockout system can let
press installed on factories floor directly, no need any pit.
This not only can save cost in foundation but also can
make factory lay out to be more changeable.
Bolster Knockouts System Make Continuous Operation to Be
Possible (Optional )
will be easy for continuous operation if select 3-stages
operation can eliminate inter stage annealing
phosphatic operation, that means can help to save
Performance Accuracy and Minimal Clearance Can
Component Precision also Reduce Vibration