a-1.jpg (10779 個位元組)
a-2.jpg (5185 個位元組) a-0.jpg (6441 個位元組)
a-4.jpg (13192 個位元組)
64057雲林縣斗六市科加二路3號
No. 3, Kejia 2nd Rd., Douliu, Yunlin County, Taiwan 64057
Tel: 886-5-5519-922       Fax: 886-5-5510-033

E-mail:sanes@ms32.hinet.net      http://www.sanes-press.com
 
Double Crank Link Presses Features of SLD Link Press
hb021.gif (326 個位元組)Operates under high approach speed, low forming speed and
   high return speed.
hb021.gif (326 個位元組)Reuces noise and vibration considerably during operation.
   Improves operation environment greatly.
hb021.gif (326 個位元組)Realizes high precision, high rigidity and high throughput
   production
hb021.gif (326 個位元組)High rigidity frame structure eliminating the opening
   distortion, fully realizing the highly efficient blanking and
   deepdrawing operation.
hb021.gif (326 個位元組)Eight long right angled slide guide rails provide confidence
   on installing high accurate die. Ensuring high accuracy
   manufacturing to be possible.
hb021.gif (326 個位元組)Improved back side operability and die conformability of
   the press.
hb021.gif (326 個位元組)Large side opening for simple installation to complete single
   and fully automated operation on coiled material.
hb021.gif (326 個位元組)High quality machine accuracy improving machine endurance,
   providing lasting value. Totally matching the requirements of
   contemporary high accuracy manufacturing industry, an
   attractive and highly dfficient model.

p2-3.jpg (10877 個位元組) Unique 8-faced right angled slide guide with extended rail structure located in the center of the slide, resulting no twisting torque. Making confident usage of accurate die, and high precision manufacturing to be possilbe.
 
Features Of Die Cushion
hb021.gif (326 個位元組) Guide Block bushing use oilful material which can eliminate daily oil check.
hb021.gif (326 個位元組) Guide block is made of medium carbon steel with hard chrome management, which promises higher rigidity and longer service life.
hb021.gif (326 個位元組)
The standard air spring type die cushion has 2 Air Spring, and 2 Pads, it could be 1 Pad & 2 Air Springs
    upon the requests of customers. To meet the needs of automatic multi-op. process, it can also be of multiple cylinder sets.
p2-4.jpg (25174 個位元組) p2-5.jpg (33109 個位元組)
 

Dimensions

p2-2.jpg (35955 個位元組)

Model STD-160 STD-200 STD-250 STD-315
Short stroke Long stroke UNIT S L S L S L S L
Capacity ton 160 200 250 315
Tonnage rating point (about B.D.C.) mm 6 7 7 7
Stroke length mm 130 200 150 250 170 280 180 300
Stroke per minute (SPM) S.P.M 40-85 30-55 35-70 25-45 25-55 20-35 25-45 15-30
Die height, slide to bolster mm 400 450 450 500 450 550 450 600
Slide adjustment mm 90 100 120 120
Slide area (a1×b1)   mm 1500×580 1850×650 2100×700 2300×800
Bolster area (a2×b2) mm 1800×760 2150×840 2400×920 2600×1000
Approx dimensions Olster surface measurement (h1) mm 900 1000 1100 1100
Press overall height (h2) mm 3220 3295 3680 3735 3900 4105 4030 4280
Poistion of anchor bolt (a3×b3) mm 2300×1320 2500×1450 2600×1570 2700×1650
Floor space required (a4×b4) mm 2520×2400 2750×2600 3000×2800 3220×2900
Main motor HP×P 20×4 25×4 30×4 40×4
Required pressure

Kg/c

5 5 5 5