Feature
Minimal angular deflection of the frame
Structural design:
It is smaller in size than the conventional press, but more effective in space occupation
Angular deflection:
The steel of the frame has high-tensile stress and minimal angular deflection.
This features to reduce punching deformation, maintain precise punching position, and prolong the life of dies.
High transmission wet clutch/brake
High performance and efficiency oil-bathed clutch/brake linings provide lasting service life time, without the worry of being worn out.
Low inertia/High torque multi-disk design, ensuring more improved sensitivity on start and brake.
Unique design allows faster intermitten operation, good for synchronized operation with robot arm.
Low noise, zero pollution, fully complied to the future requirement of environment protection.
SPECIFICATIONS
| Model | Unit | SCP-45 | SCP-60 | SCP-80 | SCP-110 | |
|---|---|---|---|---|---|---|
| Capacity | Ton | 45 | 60 | 80 | 110 | |
| Tonnage Rating Point (Above B.D.C) | mm | 3.2 | 4 | 5 | 5 | |
| Stroke Length | mm | 110 | 130 | 150 | 180 | |
| Stroke Per Minute | Variable | SPM | 50-95 | 45-85 | 40-75 | 35-65 |
| Die Height | mm | 270 | 300 | 330 | 350 | |
| Slide Adjustment | mm | 50 | 60 | 70 | 80 | |
| Slide Area | mm | 440x350 | 470x380 | 560x420 | 650x500 | |
| Bolster Area | mm | 900x450 | 970x500 | 1000x550 | 1150x680 | |
| Main Motor | HPxP | 5HP(INV) | 5HP(INV) | 7.5HP(INV) | 10HP(INV) | |
| Required pressure | kg/cm2 | 5 | 5 | 5 | 5 | |
-Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
-Custom specifications are available upon request.
| Model | Unit | SCP-160 | SCP-200 | SCP-260 | |
|---|---|---|---|---|---|
| Capacity | Ton | 160 | 200 | 260 | |
| Tonnage Rating Point (Above B.D.C) | mm | 6 | 6 | 7 | |
| Stroke Length | mm | 200 | 220 | 250 | |
| Stroke Per Minute | Variable | SPM | 30-55 | 25-45 | 20-40 |
| Die Height | mm | 400 | 450 | 500 | |
| Slide Adjustment | mm | 90 | 100 | 120 | |
| Slide Area | mm | 700x550 | 850x630 | 950x700 | |
| Bolster Area | mm | 1300x750 | 1400x840 | 1500x840 | |
| Main Motor | HPxP | 15HP(INV) | 20HP(INV) | 25HP(INV) | |
| Required pressure | kg/cm2 | 5 | 5 | 5 | |
-Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
-Custom specifications are available upon request.
Related Products
Need Inquire ?
If you need more information or quotation about this product, Our sales representative will reply as soon as possible