Single Point Fine Blanking Presses
FB1 Series
Fineblanking is a mixed metal forming process combining the technology of stamping and cold extrusion.
- Fineblanking's ability to pierce small holes and create thin web section often save the need for costly secondary drilling and machining cost.
- Throughout the fineblanking process pressure is constantly applied to both sides of the part-achieving flatness unmatched by conventional stamping.
- A wide variety of metals with good cold-forming characteristics lend themselves to fineblanking, including: carbon, alloy and stainless steel, aluminum, brass, bronze and copper alloys. Parts inherently stronger than parts produced by others.
SPECIFICATIONS
| Model | Unit | FB1-120 | FB1-160 | FB1-220 | FB1-315 | FB1-400 |
|---|---|---|---|---|---|---|
| Capacity | Ton | 120 | 160 | 220 | 315 | 400 |
| Tonnage Rating Point (About B.D.C) | mm | 6 | 7 | 8 | 11 | 13 |
| Stroke Length | mm | 80 | 90 | 100 | 100 | 100 |
| Stroke Per Minute | S.P.M | 20-60 | 20-55 | 20-50 | 20-50 | 20-50 |
| Die Height | mm | 320 | 320 | 340 | 350 | 380 |
| Slide Adjustment | mm | 50 | 60 | 70 | 70 | 100 |
| Slide Area | mm | 650x600 | 700x600 | 750x700 | 850x800 | 900x850 |
| Bolster Area | mm | 850x750 | 900x750 | 950x820 | 1050x900 | 1100x950 |
| Main Motor | HPxP | 15HP(INV) | 20HP(INV) | 25HP(INV) | 30HP(INV) | 40HP(INV) |
| Required Pressure | kg/cm2 | 5 | 5 | 5 | 5 | 5 |
| Fine Blanking Hydraulic System | ||||||
| V Force (Slide) | Ton | 20-40 | 20-60 | 20-80 | 20-100 | 30-130 |
| Counter Force (Bolster) | Ton | 20-40 | 20-60 | 20-80 | 20-100 | 30-130 |
| Hydraulic Motor | HPxP | 15HPx4P | 15HPx4P | 15HPx4P | 30HPx4P | 30HPx4P |
Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
| Model | Unit | FB1-500 | FB1-600 | FB1-700 | FB1-800 |
|---|---|---|---|---|---|
| Capacity | Ton | 500 | 600 | 700 | 800 |
| Tonnage Rating Point (About B.D.C) | mm | 13 | 10 | 10 | 10 |
| Stroke Length | mm | 100 | 100 | 100 | 120 |
| Stroke Per Minute | S.P.M | 20-50 | 25-45 | 12-30 | 12-30 |
| Die Height | mm | 400 | 400 | 550 | 550 |
| Slide Adjustment | mm | 100 | 50 | 50 | 50 |
| Slide Area | mm | 900x850 | 900x850 | 1000x950 | 1000x950 |
| Bolster Area | mm | 1100x950 | 1100x950 | 1200x1050 | 1200x1050 |
| Main Motor | HPxP | 50HP(INV) | 60HP(INV) | 75HP(INV) | 75HP(INV) |
| Required Pressure | kg/cm2 | 5 | 5 | 5 | 5 |
| Fine Blanking Hydraulic System | |||||
| V Force (Slide) | Ton | 30-160 | 30-200 | 40-270 | 40-330 |
| Counter Force (Bolster) | Ton | 30-160 | 30-200 | 40-270 | 40-330 |
| Hydraulic motor | HPxP | 30HPx4P | 30HPx4P | 40HPx4P | 40HPx4P |
Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
Related Products
Need Inquire ?
If you need more information or quotation about this product, Our sales representative will reply as soon as possible